台湾标准电机SEW仪器仪表--4101 IN Insulation Testers Up To 1 kV Digital

    
 
4101 IN   Insulation Testers
Up To 1 kV (Digital)  
4101 IN
FEATURES
 
 GENERAL :
 Display: 2 lines x 16 characters LCD.
 Auto-Null Threshold: 5 Ohm.
 Buzzer Threshold: 3 Ohm.
 Fast Test: 10 Sec.
 Long Test: 60 Sec.
 With PI and DAR Test Function: 10 Min.
 Load Battery Test Current: About 300mA.
 Power Source: 1.5V x 8 (Type AA).
 Operating Temperature: 1 degree C to 55 degree C not in full sun
 Storage Temperature: -20 degree C to 70 degree C
 PROTECTION FEATURES:
 Over Load: 700V (between all terminals).
 Over Voltage: Class III 700V towards ground.
 Fuse: 500mA (5 x 20mm), HBC, 600V fast blow.
 This family (4101 IN and 4102 MF) of originally designed unique products have features ranging from insualtion resistance testing, voltage (AC-DC) measurements with automatic hold facility, continuity test with a short circuit current of minimum 200mA.
 Two very unique features are found on the multifunction model 4102 MF; MOV and Gas Arrester Testing. Today most equipments and electrical installations are protected by MOVs and Gas arresters.
 The 4102 MF can test these devices to establish if the devices are still operating correctly or not. Energy conservation is featured on all these new advanced products. EnerSave (tm) limits the test duration to about 10 seconds to save energy.
 This new generation of test equipments have no moving parts. All calibrations are saved internally in a non volatile memory. Calibration can be done at any calibration facility around the world, without the need for dedicated calibration equipment.
 This makes these products easier to maintain and lowers the cost of calibration and ownership. Their calibration interval can be extended without much problem.
 They comply to all the latest regulation, including UK. This product family is part of our new world class series.
 Meets IEC/EN 61010-1 CAT III 600V.
SPECIFICATIONS
 
INSULATION RESISTANCE
Test Voltage (DC V) 250V/500V/1000V
Output Voltage @ 1Ma Rated test voltage + 10% max.
Measuring Ranges 2K ~2G Ohm / 4K ~ 4G Ohm / 8K ~ 8G Ohm
Accuracy +/- 0.1M ~ 4G Ohm : +/- 3%rdg, 4G ~ 8G Ohm : +/- 5%rdg
When Voltage is Constant, Current is Software Limited At +/- 1.2mA
Short Circuit Current Test +/- 4mA max.
CONTINUITY TEST
Range 0.01 - 1999 Ohm
Accuracy 0.01 ~ 100 Ohm : +/- 1%rdg, 100 ~ 300 Ohm : +/- 1.5%rdg, 300 ~ 1999 Ohm : +/- 2%rdg
Resolution +/- 2 counts
Short Circuit Current Test > 220mA
Open Circuit Voltage 5V DC
VOLTMETER
DC Voltage (Auto) 0 ~ 950V
AC Voltage (Auto) 0 ~ 700V
Resolution +/- 1V
Accuracy +/- 1.5%
Dimensions 250(L) x 190(W) x 110(D)mm
Weight Approx. 1460g (battery included).
Accessories Test leads (TEL-AL11-5), shoulder belt (BET-2800), instruction manual, batteries
特 點

● 微處理器控制系統設計。
● 寬廣型液晶顯示器。
● 測試電壓類比刻劃顯示。
● 絕緣阻抗三檔測試電壓:250V、500V、1000V。
● 可作交流直流電壓量測。
● 低阻抗(LOWΩ)自動歸零量測高阻抗(MΩ)時,被測物帶有直流或交流電壓時,
功能檔自動保護切換。
● 電容性充電電壓自動放電。
● 讀值鎖定、自動關機。
● 過電壓保護、自動電池電量檢查。
● 測試線絕緣度良好。
●符合英國第16版本。
● 符合IEC/EN 61010-1 CAT Ⅲ 600V
EN 61326-1

規格(23°C±5°C <80%R.H.)

絕緣阻抗(MΩ)
量測電壓(DCV) 250V / 500V / 1000V
測試電壓容許 額定電壓+10%
量測範圍 250V:0.2MΩ-2GΩ
500V:0.2MΩ-4GΩ
1000V:0.2MΩ-8GΩ
準確度 0.2MΩ-4GΩ:±3%讀值
4GΩ-8GΩ:±5%讀值
量測推動電流 1.2mA
短路電流 Z大4mA
導通測試(Ω)
量測檔位 0.01-1999
準確度 0.01-100Ω:±1.0%讀值
100-300Ω:±1.5%讀值
300-1999Ω:±2.0%讀值
短路電流 >220mA
開路電壓 5V dc
電壓測試(ACV.DCV)
交流電壓(ACV) 0-700V
直流電壓(DCV) 0-950V
準確度 (±1.5%讀值+1位數)
一般敘述
液晶顯示器 16(字)x2(行)LCD
自動歸零 5Ω以下
蜂鳴器響應 3Ω以下
快速測試 10秒
長時測試 60秒
操作溫度 0°C ~40°C
儲存溫度 -10°C ~50° C
外形尺寸 250(長)x190(寬)x110(高)mm
重量(含電池) 約1460g
使用電池 1.5V(AA)x8(顆)