台湾标准电机SEW仪器仪表--1105 ER Earth Resistance Testers 3 Wire Analog

    
 
1105 ER   Earth Resistance Testers
3 Wire (Analog)    
1105 ER
FEATURES
 
 Capable of measuring earth voltage.
 2mA measuring current permits the testing of earth resistance without tripping eath leakage current breakers in the circuit under test.
 In addition to faciliating for precision measurement, test leads for simplified two-wire measuring system also are supplied as standard accessories.
 Battery operated.
 Battery life indicator.
 
 EN 61326-1 safety standard.
 Calibration performed with supplied test leads.
SPECIFICATIONS
 
Measuring Ranges Earth Resistance:
0~12Ohm / 0~120Ohm / 0~1200Ohm
Earth Resistivity:
0-30V ac (40-500Hz)
Accuracy Earth Resistance:
+/-3% of full scale
Earth Voltage:
+/-2.5% of full scale
Measurment System Earth resistance by constant current inverter(Sauare Signal) 820Hz approx. 2mA
Power Source 1.5V (AA) x 8 or equivalent
Dimensions 175(L) x 85(W) x 75(D)mm
Weight Approx. 600g (battery included)
Accessories Test leads (AL-36: red-15m, yellow-10m, green-5m)
Simplified measurement probe. (AL-33)
Auxiliary earth spikes
Shoulder belt
Instruction manual
Batteries
特 點
● 可量測接地電阻(0-1200Ω)和接地電壓(0-30VAC)。
● 量測電流僅有2mA,不易造成漏電斷路器的跳脫。
● 提供標準的三線式測試線和簡易測試線。
● 電池電量指示, 可檢查電池電力是否足夠(GOOD)。
規 格 (23°C±5°C <80%R.H.)
量測檔位 接地電阻 : 0-12Ω / 0-120Ω / 0-1200Ω
接地電壓 : 0~30VAC(40-500Hz)
準確度 接地電阻 : ±3%滿刻度
接地電壓 : ±2.5%滿刻度
量測系統 820Hz 2mA 定電流
測試連結開路 LED不會點亮
外形尺寸 175(長)×85(寬)×75(高)mm
重量 約600克(含電池)
使用電池 1.5V(AA)×8(顆)